Questions tagged [jenkinsfile]

For questions about Jenkinsfiles which are version-controlled text files containing definitions of Jenkins Pipelines

Filter by
Sorted by
Tagged with
1
vote
0answers
15 views

Parallel execution of same job with different configuration- pipeline jenkinsfile script path is updated incorrect

I have a jenkins job A and i have 5 tests (each triggering job A with updation of different jenkinsfile script path as Before Each test) executing in parallel Test1 with pipeline-jenkinfile-1 Test2 ...
0
votes
1answer
50 views

How can I add a when clause for a specific upstream trigger in a Jenkins declarative pipeline?

I have a job defined as a declarative pipeline that gets triggered by a number of different upstream jobs. Depending on which upstream job triggered my job, I don't necessarily need to run all of the ...
0
votes
0answers
40 views

How to configure Bitbucket Build Status Notifier Jenkins plugin to connect to BitBucket Cloud for Jenkins Pipeline projects

I would like to know how to configure Bitbucket Build Status Notifier Jenkins plugin to connect to BitBucket Cloud for Pipeline projects. Basic instructions are here, on a plugin homepage: https://...
1
vote
1answer
77 views

Skip stages in Jenkins pipeline

I am using a scripted pipeline where I am required to skip some stages conditionally.Is there a way to show skipped stages on Jenkins UI other than importing org.jenkinsci.plugins.pipeline....
1
vote
1answer
28 views

Jenkins: Access job/plugin configuration values inside pipeline

I am trying the access the values set on a job's configuration page from within my pipeline. These values are not made available as params, nor are they injected as envvars. Setup Jenkins, v2.263.1 ...
0
votes
1answer
135 views

Jenkins declarative pipeline Warning: JENKINS-41339 probably bogus PATH

I am struggling with this issue inside my declarative pipeline. I am trying to use python's docker image as my agent and run some scripts and I am receiving warning: Warning: JENKINS-41339 probably ...
0
votes
0answers
23 views

How to build through Jenkins on merge of two branches, if there is CI Skip enabled and both branches have ci skip commit message?

I am trying to implement jenkins ci skip build. I tried SCM Skip plugin https://plugins.jenkins.io/scmskip/ It worked for me , whenever there was a regex matching .[ci skip].. Unfortunately, This ...
0
votes
1answer
194 views

Using Jenkins declarative when conditions in scripted pipelines

Jenkins declarative pipelines offer very convenient when directive with conditions like changeset. Is is possible the this changeset and other when conditions in a scripted pipeline?
1
vote
1answer
58 views

How to add label to Pull Request via Github API?

According to GitHub API user can add label to an issue using this POST request. I tried using this request but with PR number instead to automatically set label on PR. Here is the function I wrote: ...
0
votes
1answer
61 views

How can I check if there is a new build the same jenkins pipeline

I have a github multibranch pipeline, in declarative format. It is configured to trigger on pushes to pull request branches (ie, branches which are included in pull requests to a target branch, say ...
0
votes
1answer
58 views

Docker in docker volume mount doesn't work

I have the below command in my Jenkinsfile: docker run --rm -v "${WORKSPACE}":/var/cache/de --entrypoint=/usr/local/bin/pytest ${IMAGE_NAME}:${IMAGE_VERSION} -m "not require_dss" -...
0
votes
0answers
50 views

How to fix sed command to work in groovy

I have the following code which works in gitlab (without the sh part): sh ''' mkdir ./pylint docker run --rm --entrypoint=/usr/local/bin/pylint ${IMAGE_NAME}:${IMAGE_VERSION} --rcfile=.pylintrc --exit-...
0
votes
0answers
64 views

getting error in Jenkinsfile - command not found

I'm trying to setup my company's first CI/CD pipeline, to build & deploy docker containers in gke, it has been a a great learning curve so far, however I'm stuck with error in Jenkinsfile /var/lib/...
2
votes
2answers
1k views

GitHub Payload in Jenkins

I'm using the GitHub plugin with Jenkins, and I'm trying to figure out how I can access the webhook payload. I'm aware that the Generic Webhook Trigger has this ability, as well as the GitHub Pull ...
2
votes
3answers
2k views

Is there a way to use a Jenkinsfile from a git-submodule in a multibranch pipeline?

Background: The nature of our project's source involves multiple long-living branches, each one has its own Jenkins job (manually created). Multibranch limitation: Unfortunately we do not use a ...
0
votes
0answers
6 views

Run check on a sample of CI events

Suppose we have a very expensive test in terms of time. This may be some kind of deep analysis or performance test. I would like to run this on a sample of CI events in a Jenkins pipeline, say 20% of ...
0
votes
0answers
301 views

how to check if a pipeline variable is empty

Team, I have a Jenkins job that runs every 5minutes and sends a slack notify to channel. but I want to not send slack if there is 0 returned in count variable. how to achieve this? like with if else ...
0
votes
1answer
116 views

What is the best approach to deploying to multiple servers using Jenkins?

Trying to figure out the best approach for deploying to multiple servers using Jenkins Blue Ocean pipeline. We will have six servers in development, six in QA, six in Staging, and six in production. ...
17
votes
2answers
22k views

Running a background process in Pipeline job

I am looking for a way to run a java process in background using Jenkins declarative pipeline. Below is the snippet of code stage('Deploy'){ steps{ script{ withEnv(...
7
votes
1answer
86 views

How to have jenkins add a review to a pull request

I have a Jenkins instance, with credentials for a "robot" github account, which we use to interact with the GitHub API as a team. Typically, jobs are defined as declarative pipelines. I am ...
12
votes
3answers
10k views

One Jenkinsfile or multiple?

So I have a Jenkinsfile defining a build pipeline and then a Jenkins job (not pipeline) with a very simple deployment script for our Docker stacks. Seeing that Jenkinsfiles can become as complex and ...
1
vote
1answer
2k views

Jenkinsfile script to waitUntil a folder is created

With this Jenkinsfile code, I am trying to test A/B folder creation, and also testing if waitUntil works till the folder is created, I expect it to wait for 0 secs as the folder is created before ...
2
votes
1answer
129 views

simulate post step for dynamically generated Jenkins pipeline stages

The following simplified Jenkinsfile dynamically generates sequentially executed stages; however, I cannot create a post step for these dynamically stages, like so: pipeline { agent none ...
2
votes
1answer
45 views

Pass environment variables from pipeline job A to pipeline job B

I passed params to pipeline B and set the environment variables from parameters. However, "${params.URL}" is evaluated as null. Pipeline A is declared in Jenkinsfile: pipeline { agent any ...
4
votes
2answers
4k views

How to check return status of parallel branches in jenkins pipeline

I am running a Jenkins job on multiple slaves. Following is the code structure: def branches = [:] def allNodes = Jenkins.getInstance().getNodes() for (int i =0; i < allNodes.size(); i++) { ...
1
vote
1answer
69 views

Running parallel builds from jenkins pipeline job triggers and waits for same job on other project

I have this test pipeline code, it runs 2 build on different nodes on build_servers as expected. pipeline { agent { label 'myserver' } stages { stage('1') { steps { ...
1
vote
1answer
266 views

How to mark build success when one of the stages is aborted?

I've a pipeline with stages where one of the stage, intermittently takes longer than expectation and hence using timeout to abort it. But if the stage is aborted, build also marked as aborted. ...
1
vote
2answers
567 views

Jenkins - load scripted parameters from a SCM repo

I am using all kind of parameters like "Active Choice Parameter", "Active Choice Reactive Parameter", "Active Choice Reactive Reference Parameter" that have a lot of Groovy code within them. My ...
0
votes
1answer
73 views

Jenkinsfile handling an expected job failure

I've got two types of failures to account for within a Jenkins job. The job genuinely failed The job failed because of a certain bit of info hasn't been published. Nothing is actually wrong here. ...
2
votes
1answer
3k views

how to checkout only specific folder from git repo((monorepo)) and build

Hey folks I need some help on the jenkinsfile. Below is my usecase This is the strcuture of my GIT repo: root |->app1 | |->jenkinsfile | |->dockerfile1 |->app2 |->...
0
votes
1answer
889 views

Getting permission denied with docker pipeline on jenkins

I have jenkins deployed via helm charts on kubernetes cluster Now i want to be able to run helm to deploy helm charts applications on my kubernetes cluster and have the following in my jenkinsfile ...
1
vote
1answer
190 views

Is there a way to set build parameters outside of the pipeline directive?

My build parameters are defined in my jenkinsfiles All builds run on container slaves on google kubernetes engine cluster This means users need to wait for a container to start before anything ...
4
votes
2answers
8k views

JenkinsFile to get git branch name

I want to get git current checkout BRANCH NAME in my Jenkins file here is the code snippet... Here I am trying to push a file to my current branch I have tried many things could not find it... ...
2
votes
2answers
4k views

How to define dynamic parallel stages in a Jenkinsfile?

In declarative pipelines, Jenkins allows the definition of parallel stages. It further allows scripted pipeline general purpose scripts to create and manipulate the artifacts of the declarative ...
1
vote
0answers
393 views

Running a rollback pipeline on abort in Jenkins? [duplicate]

I've got a set of build pipelines and I've developed a new rollback feature. Running the rollback pipeline manually invokes the rollback actions and does what I expect. I'm also trying to capture any ...
5
votes
3answers
2k views

Why does the Jenkins bitbucket-build-status-notifier-plugin post the status to the shared pipeline library repository?

I am attempting to implement the Jenkins bitbucket-build-status-notifier-plugin, found here: https://github.com/jenkinsci/bitbucket-build-status-notifier-plugin We used the shared-pipeline code ...
1
vote
1answer
287 views

Prevent ${PIPELINESTATUS[0]} from being evaluated in Jenkinsfile

Below is a script I am running in the deploy of a docker container. The docker ps -a | grep $APP_CONTAINER_NAME command is returning non-zero when the container was not correctly built/tested, hence ...
1
vote
1answer
2k views

Jenkins does not seem to be running inside a container

I am getting an error while running the Jenkins file tp build and push the docker image into docker hub . you can reveiw my code github : https://github.com/iakshaykr/webapp.git (using jenkins_pipe ...
0
votes
1answer
61 views

Jenkinsfile: Pull image from registry endpoint A, push built image to registry endpoint B

I have two endpoints for my registry (Nexus OSS): Endpoint 10500 to pull images from. And Endpoint 10501 to push images to. (I can go into detail what the idea is and why we think Nexus requires ...
2
votes
1answer
3k views

How to mark a step as failed or unstable on timeout, instead of aborting build?

I have a stage in my Jenkins declarative pipeline that looks like: stage('Step Tests') { steps { dir('test') { catchError(catchInterruptions: true, buildResult: 'FAILURE') { ...
1
vote
1answer
6k views

How to define global variables in groovy file, which I want to load and consume?

I have a Jenkins parent groovy file which consumes the child groovy file Parent grooy file: ... def child = load 'child-groovy-file'; child.execute(); Child groovy file: a = "first letter"; b = "...
3
votes
2answers
1k views

Jenkins Shared lib not working properly

Recently I tried to add Shared Libraries to my Jenkins instance to make it easier to maintain all code that runs in each project. I have a repo myorg/jenkins Inside of it I have Jenkinsfile and ...
1
vote
1answer
628 views

Docker fails to mount volume inside Jenkins scripted pipeline

I'm working on a CI Jenkins build with scripted pipeline. From Jenkins on one machine, I'm connecting with already configured Jenkins slave on another machine (M2). I'm able to successfully execute ...
1
vote
1answer
1k views

packge.json not found while executing on Jenkins

My Dockerfile looks something like this. FROM mhart/alpine-node:8.11.3 RUN mkdir -p /app COPY ./ /app WORKDIR /app/build RUN yarn global add serve CMD ["serve", "-l", "3000"] EXPOSE 3000 And ...
1
vote
1answer
417 views

Jenkins Pipeline steps that run before Jenkinsfile

I'm just starting to get my toes wet with Jenkins and CI/CD. I've built a set of static analysis tools and corresponding configurations I want to run before a branch's Jenkinsfile is even considered. ...
0
votes
2answers
813 views

Jenkins multi branch pipeline configuration for bitbucket [closed]

How to configure multi branch pipeline job for bitbucket ....i have to clone from different branches and build the jobs.... I found multi branch is the option... How to configure for bit bucket
2
votes
2answers
4k views

Cleanest way to prematurely exit a jenkins pipeline from inside a withEnv

In a Jenkins scripted pipeline with the below structure, the return command will exit only the withEnv. node{ withEnv([...]){ stage('1'){ ... } stage('2'){ ...
2
votes
2answers
5k views

How can a Windows server be a slave to Jenkins running on Linux when there in an error installing the slave-agent.jnlp file?

I want to have a Windows Server 2016 slave node with a master Jenkins (version 2.89.2) running on Red Hat Enterprise Linux 7.x. I am trying to install the slave-agent.jnlp file from the Jenkins web ...
1
vote
1answer
1k views

Trigger a job and get the job log on the same page in Jenkins

I would like to trigger the job in Jenkins and also get the log on the same page. E.g. Kind of IDE where we can run the code in one side and get the output on the other side. Are there any tools ...
1
vote
1answer
210 views

How to assign saltstack pillar values from Jenkins comma separated input parameters?

I have a Jenkins job with string parameter as target "server1,server2". Jenkins pipeline script is expected to execute the job on server1 and server2 respectively. There is a common salt sls file that ...